In recent years, LED display production technology has gradually matured in my country, and wide application fields and popularization have become a trend. However, most of the LED display manufacturers currently do not have the true ability to produce such products, which brings hidden dangers to LED display products and even affects the entire market. Static electricity is one of them. So, what is the cause of static electricity of LED display? What harm does static electricity bring to LED display production? This article will explain in detail for you.

Causes of static electricity:

Microscopically speaking, according to the theory of atomic physics, matter is in a state of electrical equilibrium when it is electrically neutral, and the gains and losses of electrons generated by the electronic contact of different substances cause the matter to lose electrical balance and generate static electricity.

Macroscopically, the reasons are: friction between objects generates heat, which stimulates electron transfer; contact and separation between objects produce electron transfer; electromagnetic induction causes an unbalanced distribution of charges on the surface of the object; the combined effect of friction and electromagnetic induction.

Electrostatic voltage is generated by the contact and separation of different kinds of substances. This effect is known as triboelectricity, and the voltage generated depends on the characteristics of the materials rubbing against each other. Because the LED display screen in the actual production process is mainly caused by direct and indirect contact between the human body and related components, static electricity is generated. Therefore, according to the characteristics of the industry, some targeted electrostatic prevention measures can be taken.

The harm of static electricity in the LED display production process

If anti-static is neglected in any aspect of production, it will cause electronic equipment to malfunction or even damage it.

When semiconductor devices are placed alone or in a circuit, even if they are not powered on, static electricity may cause permanent damage to these devices. As we all know, LEDs are semiconductor products. If the voltage between two or more pins of the LED exceeds the breakdown strength of the component medium, it will damage the component. The thinner the oxide layer, the greater the sensitivity of LEDs and driver ICs to static electricity. For example, the lack of solder, the quality of the solder itself, etc., will cause serious leakage paths and cause devastating damage.

Another type of failure is caused when the temperature of the node exceeds the melting point of semiconductor silicon (1415°C). The pulse energy of static electricity can generate local heat generation, so there is a direct breakdown of the lamp and IC. This failure can occur even if the voltage is lower than the breakdown voltage of the medium. A typical example is that the LED is a diode composed of a PN junction, and the breakdown between the emitter and the base will reduce the current gain sharply. After the LED itself or the ICs in the drive circuit are affected by static electricity, functional damage may not occur immediately. These potentially damaged components usually show up during use, so the life of the display is affected. It Is fatal.